What You Should Know About Fine Woodworking

Are you a handyman? Are you more artistically inclined? Do you like the thought of making beautiful things from wood? If so, you are like many other people that take pleasure in creating with wood. The key to having fun with woodworking is knowing some tips to help, which is what this article is going to show you.

Tape can be your friend when gluing stained wood together. Place the two pieces of wood together in a clamp and tape the seam before applying the glue. Carefully cut the tape along the joint and then separate the two pieces of the wood and apply the glue along the joint. Clamp together and allow to dry. The tape will keep the glue off the wood and is easy to remove once the glue is dried.

Familiarize yourself with the tools that you are going to use. This is a very important tip for the beginner, but even more, advanced woodworkers can benefit from it too. Lay out the tools and make sure that you know the workings of each one. If you’ve got a brand new tool to you, spend the time that you need with it.

Dust can ruin the finish of any woodworking project. Keep dust away from your projects and workbench by vacuuming it up. If you blow or brush it away, it will just land somewhere else, likely back on your project. Also, use a damp cloth to wipe all surfaces before you begin top-coating, or staining.

If you have a high skill level when it comes to woodworking you may want to think about taking some time to share your knowledge with others. You can keep it simple by recording what you do step-by-step or you could take it to a higher level and teach a class.

Before purchasing or using any type of wood, you should know all about it. Wood designated as “paint grade” is lower in quality and not suitable for staining. When it comes to veneer and particle board, veneer doesn’t usually absorb the right amount of stain, and particle board absorbs way too much. Having the right wood will help ensure that your project goes as planned.

You likely already know that you want to have a ruler on your hands at all times, but it can be hard to keep it from falling out of your pocket. Buy a metal ruler, and try keeping it in the same pocket as the smaller telescoping magnet you use to pick up loose metal screws. The magnet keeps both objects firmly in your pocket.

You can use a golf tee to help tighten up the hinges of an interior door. Remove the door and the hinges from the door frame and gently tap a golf tee into each screw hole. Cut the extra golf tee off and install the door again. The tee will provide the screw with something that it can bite into.

When you find a nice level spot on your workshop floor for your table saw, it can be difficult finding the same spot after you put your saw away. When you do find a level spot, use duct tape on the floor so you know where to position your table saw next time you need it.

Join a woodworking club if you have the time to do so. This can lead to you learning a great deal more about woodworking, and an added benefit is that you will make friends that enjoy the same passion as you. Additionally, it can be rewarding to share your knowledge with others that are just getting started.

Do you find that your joint compound seems to dry out in between uses? There is a simple fix to help keep your joint compound moist. Simply pour a small amount of water on top of your joint compound before sealing it. The next time you need to use the joint compound, drain off the excess water and your joint compound will be perfectly moist.

Keep your tools and hardware organized. When you keep clutter to a minimum, it does more than just add discipline to your workshop. It also keeps distractions, hazards, and time spent hunting down a misplaced item to a minimum. Keeping screws, nails, and other hardware and accessories in one place neatly stored until needed makes your projects faster and keeps you safer.

Only cut using sharp tools. Older and dull tools result in tear-outs and even chipping, which is frustrating and a waste of time. Sharp tools mean you get clean cuts quickly. You’ll also spend a lot less time sanding things to get just the right look and fit that you need.

Make use of one of the beveled inner parts of a pencil sharpener. If you mount it on a small shaft, you can use it in a drill. It is a good tool for shaping smaller pieces. When it gets dull, just sharpen it on an emery cloth by running the drill at a slow speed.

You can make a sanding block even better. Cut a small slot about 3/8 of an inch deep, a little less than an inch from the outside edge. Run it the entire length of the block. Now the sandpaper will fit into this slot easily, and it will stay in place more securely.

For a beginner, sometimes it is best to buy kits instead of cutting the entire project yourself. You should be able to finish your project quicker with a precut kit. These kits will help you gain some valuable insight on the steps involved in a project so that the next time you can do it all yourself.

When you need to finish, sand, shape, file, or cut a small item, you may wish to glue it to a pedestal stick rather than attempting to clamp it. Clamps can be cumbersome when doing fine work, and sometimes, it is not even possible to use a clamp. A dot of hot glue will hold your small piece in place, and you can simply pop it free using a putty knife when finished.

As you can see, woodworking takes a bit of know-how and creativity. No matter what kind of woodworking you may be into, having tips and tricks in your tool belt is just as important as the actual tools. Take what you have learned here and have some fun putting your skills to work.

Author

Write A Comment